朋友们，大家好！
是不是经常感觉自己的炒股软件图表上指标太多，眼花缭乱？均线、布林带、CCI……一个个切换看得头都大了，而且信号还经常互相矛盾。
今天，就给大家分享一个我私藏的 “全能型”指标。它就像一个专业的图表分析助手，把多种经典策略融为一体，直接在K线图上为你自动标记关键点、画出趋势线、并提示买卖信号，让你对盘面的判断瞬间清晰起来！
一、这个指标能做什么？
简单来说，它主要为你解决了三大核心问题：
- 自动识别“顶”与“底”
- 指标会在K线的相对高点和相对低点，用醒目的文字和颜色进行标记。
- 再也不用自己费劲地去猜哪里是波段的起点和终点了，趋势的轮廓一目了然。
- 清晰展现趋势通道
- 它整合了改良的布林带和多空分界线，能直观地告诉你当前价格是处于强势通道还是弱势通道。
- 通过不同颜色的K线填充，直接区分多头区域和空头区域，帮你紧跟趋势。
- 精准提示买卖点
- 在关键的“底”部区域，你会看到明确的 “买” 字提示；在“顶”部区域，则会看到 “卖” 字提示。
- 这为你提供了潜在的入场和离场参考，避免情绪化交易。
二、指标核心功能图解
[此处务必插入一张使用该指标的股票K线图效果截图]
从图中你可以清晰地看到：
- 红色标记的 “顶” 和 绿色标记的 “底”。
- 根据趋势变化的红绿K线，直观显示多空力量转换。
- 在波谷和波峰附近出现的 “买”、“卖” 提示信号。
- 此外，还有中枢分割线、强弱分界线等高级功能，帮助你进行更精细的分析。
三、核心源码分享
这个指标融合了均线、布林带、CCI、缠论笔段等多种逻辑，经过精心设计和反复优化。以下是核心源码，拿去就能用！
文华财经6源码：
M:=9;
N1:=3;
N2:=6;
NC3:=12;
NC4:=24;
BBI:=(MA(CLOSE,N1)+MA(CLOSE,N2)+MA(CLOSE,NC3)+MA(CLOSE,NC4))/4;
顶:=BBI+3*STD(BBI,13),RGB(0,128,65);
底:=BBI-3*STD(BBI,13),RGB(231,231,231);
X:=3;
HN:=HHV(HIGH,5);
LLY:=LLV(LOW,5);
HH3:=BARSLAST((HN>REF(HN,1)));
LL3:=BARSLAST((LLY<REF(LLY,1)));
A:=IF((HH3 < LL3),1,IF((HH3 > LL3),-1,0));
HM:=HHV(HIGH,3);
LM:=LLV(LOW,3);
HM1:=IF(H<REF(H,1)&&H<REF(H,2)&&H<REF(H,4)&&L<REF(L,1)&&L<REF(L,3)&&L<REF(L,5)&&OPEN>CLOSE&&(HHV(OPEN,0)-CLOSE)>0,REF(H,4),0);
LM1:=IF(L>REF(L,1)&&L>REF(L,3)&&L>REF(L,5)&&H>REF(H,1)&&H>REF(H,2)&&H>REF(H,4)&&OPEN<CLOSE&&(CLOSE-LLV(OPEN,0))>0,REF(L,4),0);
HM2:=VALUEWHEN(HM1>0,HM1);
LM2:=VALUEWHEN(LM1>0,LM1);
KM1:=IF(CLOSE>HM2,-3,IF(CLOSE<LM2,1,0));
KM2:=VALUEWHEN(KM1<>0,KM1);
GM:=IF(KM2=1,HM2,LM2);
GM1:=VALUEWHEN(ISLASTBAR,GM);
BL:=2;
TMPM:=KM2;
WM1:=KM2;
WM2:=OPEN-CLOSE;
HTM:=IF(OPEN>CLOSE,OPEN,CLOSE);
LTM:=IF(OPEN<CLOSE,OPEN,CLOSE);
HJ:=2;
//均线,0
QZS:=(EMA(CLOSE,3)+EMA(CLOSE,6))/2;
MA5:=MA(C,8),COLORWHITE,LINETHICK1;
MA10:=MA(C,20),COLORGREEN,LINETHICK1;
//改良布林
ZX:=MA(CLOSE,26);
TMP2:=STD(C,26);
SA:=ZX+2*TMP2;
BBIBOLL:=(MA(C,3)+MA(C,6)+MA(C,12)+MA(C,24))/4;
多空线:=BBIBOLL, COLORWHITE,LINETHICK1;
牛17:=IF(X=2 OR X=3,MA(C,17),NULL),COLORRED,LINETHICK1;
中布:=IF(BL>0 ,ZX,NULL), COLORYELLOW,LINETHICK1;
布上:=IF(BL>1,SA,NULL), COLORCYAN,LINETHICK1;
XA:= ZX-2*TMP2;
布下:=IF(BL>1,XA,NULL),COLORCYAN,LINETHICK1;
//缠论
局部低点预选A:=BACKSET(LLV(L,5)<REF(LLV(L,4),1),4);
局部低点预选B:=BACKSET(局部低点预选A=0 AND REF(局部低点预选A,1)=1,2);
局部低点预选C:=IF(局部低点预选B=1 AND REF(局部低点预选B,1)=0,-1,0);
局部高点预选A:=BACKSET(HHV(H,5)>REF(HHV(H,4),1),4);
局部高点预选B:=BACKSET(局部高点预选A=0 AND REF(局部高点预选A,1)=1,2);
局部高点预选C:=IF(局部高点预选B=1 AND REF(局部高点预选B,1)=0,1,0);
缺口判断:=IF(L>REF(H,1),1,IF(H<REF(L,1),-1,0));
距前高天:=BARSLAST(局部高点预选C=1);
距前低天:=BARSLAST(局部低点预选C=-1);
小值周期:=20;
大值周期:=20;
低保留AA:=IF(局部低点预选C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留AB:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判断,距前高天)=-1 OR LLV(L,距前低天+2)<REF(LLV(L,距前低天+1),1)),-1,0);
低保留S:=IF((低保留AA=-1 OR 低保留AB=-1) AND L<REF(H,距前高天+1),-1,0);
预判:=IF((距前低天<4 AND HHV(缺口判断,距前低天)<>1) OR REF(低保留S,距前低天)=0,1,0);
判断:=IF(局部高点预选C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND 预判=1 AND 大值周期>REF(小值周期,距前低天+1) AND 大值周期>REF(小值周期,距前低天) AND 大值周期>REF(大值周期,距前高天),1,0);
高保留A:=IF(局部高点预选C=1 AND REF(距前低天,1)>REF(距前高天,1) AND HHV(H,距前低天+1)>REF(HHV(H,距前低天+1),1),1,0);
高保留B:=IF(局部高点预选C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND REF(低保留S,距前低天)=-1 AND (距前低天>=4 OR HHV(缺口判断,距前低天)=1),1,0);
高保留:=IF((高保留A=1 OR 高保留B=1 OR 判断=1) AND H>REF(L,距前低天+1),1,0);
预判A:=IF((距前高天<4 AND HHV(缺口判断,距前高天)<>1) OR REF(高保留,距前高天)=0,1,0);
判断A:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND 预判A=1 AND 小值周期>REF(大值周期,距前高天+1) AND 小值周期>REF(大值周期,距前高天) AND 小值周期>REF(小值周期,距前低天),-1,0);
低保留A:=IF(局部低点预选C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留B:=IF(局部低点预选C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判断,距前高天)=-1 OR 判断A=-1),-1,0);
低保留:=IF((低保留A=-1 OR 低保留B=-1) AND L<REF(H,距前高天+1),-1,0);
距前高天A:=BARSLAST(高保留=1);
距前低天A:=BARSLAST(低保留=-1);
预判X:=IF((距前低天A<4 AND HHV(缺口判断,距前低天A)<>1) OR REF(低保留,距前低天A)=0,1,0);
判断X:=IF(局部高点预选C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND 预判X=1 AND 大值周期>REF(小值周期,距前低天A+1) AND 大值周期>REF(小值周期,距前低天A) AND 大值周期>REF(大值周期,距前高天A),1,0);
高保留XA:=IF(局部高点预选C=1 AND REF(距前低天A,1)>REF(距前高天A,1) AND HHV(H,距前低天A+1)>REF(HHV(H,距前低天A+1),1),1,0);
高保留XB:=IF(局部高点预选C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND REF(低保留,距前低天A)=-1 AND (距前低天A>=4 OR HHV(缺口判断,距前低天A)=1),1,0);
高保留X:=IF((高保留XA=1 OR 高保留XB=1 OR 判断X=1) AND H>REF(L,距前低天A+1),1,0);
预判XA:=IF((距前高天A<4 AND HHV(缺口判断,距前高天A)<>1) OR REF(高保留XA,距前高天A)=0,1,0);
判断XA:=IF(局部低点预选C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND 预判XA=1 AND 小值周期>REF(大值周期,距前高天A+1) AND 小值周期>REF(大值周期,距前高天A) AND 小值周期>REF(小值周期,距前低天A),-1,0);
低保留XA:=IF(局部低点预选C=-1 AND REF(距前高天A,1)>REF(距前低天A,1) AND LLV(L,距前高天A+1)<REF(LLV(L,距前高天A+1),1),-1,0);
低保留XB:=IF(局部低点预选C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND (距前高天A>=4 OR LLV(缺口判断,距前高天A)=-1 OR 判断XA=-1),-1,0);
低保留X:=IF((低保留XA=-1 OR 低保留XB=-1) AND L<REF(H,距前高天A+1),-1,0);
距前高天YA:=BARSLAST(高保留X=1);
距前低天YA:=BARSLAST(低保留X=-1);
预判YX:=IF((距前低天YA<4 AND HHV(缺口判断,距前低天YA)<>1) OR REF(低保留X,距前低天YA)=0,1,0);
判断YX:=IF(局部高点预选C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND 预判YX=1 AND 大值周期>REF(小值周期,距前低天YA+1) AND 大值周期>REF(小值周期,距前低天YA) AND 大值周期>REF(大值周期,距前高天YA),1,0);
高保留YXA:=IF(局部高点预选C=1 AND REF(距前低天YA,1)>REF(距前高天YA,1) AND HHV(H,距前低天YA+1)>REF(HHV(H,距前低天YA+1),1),1,0);
高保留YXB:=IF(局部高点预选C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND REF(低保留X,距前低天YA)=-1 AND (距前低天YA>=4 OR HHV(缺口判断,距前低天YA)=1),1,0);
高保留YX:=IF((高保留YXA=1 OR 高保留YXB=1 OR 判断YX=1) AND H>REF(L,距前低天YA+1),1,0);
预判YXA:=IF((距前高天YA<4 AND HHV(缺口判断,距前高天YA)<>1) OR REF(高保留YXA,距前高天YA)=0,1,0);
判断YXA:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND 预判YXA=1 AND 小值周期>REF(大值周期,距前高天YA+1) AND 小值周期>REF(大值周期,距前高天YA) AND 小值周期>REF(小值周期,距前低天YA),-1,0);
低保留YXA:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)>REF(距前低天YA,1) AND LLV(L,距前高天YA+1)<REF(LLV(L,距前高天YA+1),1),-1,0);
低保留YXB:=IF(局部低点预选C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND (距前高天YA>=4 OR LLV(缺口判断,距前高天YA)=-1 OR 判断YXA=-1),-1,0);
低保留YX:=IF((低保留YXA=-1 OR 低保留YXB=-1) AND L<REF(H,距前高天YA+1),-1,0);
AAAD:=IF(高保留YX=1 AND 低保留YX=-1 AND H>REF(H,REF(距前高天YA,1)+2),1,IF(高保留YX=1 AND 低保留YX=-1 AND L<REF(L,REF(距前低天YA,1)+2),-1,0));
极点保留:=IF(AAAD=0,高保留YX+低保留YX,AAAD);
G:=MA(C,5);
D:=MA(C,10);
NNH:=BARSLAST(H=HHV(H,7)) ,NODRAW;
NNL:=BARSLAST(L=LLV(L,7)) ,NODRAW;
PD:=REF(G,NNH)>REF(D,NNH) ,NODRAW;
NN:=IF(REF(G,NNH)>REF(D,NNH) AND NNH<=4,NNH,IF(REF(G,NNL)<REF(D,NNL) AND NNL<=4,NNL,5)) ,NODRAW;
N:=IF(ISLASTBAR AND NN>0,NN,5) ,NODRAW;
HH:=REF(H,N)=HHV(H,6);
LL:=REF(L,N)=LLV(L,6);
FG01:=BACKSET(HH,N+1)>BACKSET(HH,N),NODRAW;//只设置前面第6个
FD01:=BACKSET(LL,N+1)>BACKSET(LL,N) ,NODRAW;
FG02:=FG01=FD01 AND G>D,NODRAW;
FD02:=FG01=FD01 AND G<D,NODRAW;
//高底是同一K看均线位置//
FG001:=IF(BARSLAST(FD01)>BARSLAST(FG01),FG01,0),NODRAW;
//高点处
FD001:=IF(BARSLAST(FG001)=0 AND BARSLAST(FG01)=BARSLAST(FD01) AND D>G,FD01,NULL);
FD003:=IF(BARSLAST(FG001)=0 AND BARSLAST(FG01)>BARSLAST(FD01),FD01,0),NODRAW;
TTTT:=BARSLAST(FD01),NODRAW;
FG0:=FG01 AND H=HHV(H,IF(FG02=1,BARSLAST(REF(FD01,1))+1,BARSLAST(FD01))) AND FD02=0 ,NODRAW;
FD0:=FD01 AND L=LLV(L,IF(FD02=1,BARSLAST(REF(FG01,1))+1,BARSLAST(FG01))) AND FG02=0 ,NODRAW;
FG00:=FG01 AND IF(FG02=1,H=HHV(H,BARSLAST(REF(FD01,1))+1),H=HHV(H,IF(BARSLAST(L=LLV(L,7))>=5,5,BARSLAST(FD01)))) AND FD02=0 ,NODRAW;
FD00:=FD01 AND IF(FD02=1,L=LLV(L,BARSLAST(REF(FG01,1))+1),L=LLV(L,IF(BARSLAST(H=HHV(L,7))>=5,5,BARSLAST(FG01)))) AND FG02=0 ,NODRAW;
//高低点间周期
GT:=BARSLAST(FG00),NODRAW;
DT:=BARSLAST(FD00),NODRAW;
//第一次处理高低点间多余的点
LLLL:=DT=0 AND REF(DT,1)<GT AND L>REF(L,REF(DT,1)+1),NODRAW;
FG1:=BACKSET(REFX(GT,1)=0 AND GT<DT AND REFX(H,1)>=REF(H,GT),GT+1),NODRAW;
FD1:=BACKSET(REFX(DT,1)=0 AND DT<GT AND REFX(L,1)<=REF(L,DT),DT+1),NODRAW;
FG11:=IF(GT=0 AND REF(GT,1)<DT AND IF(REF(G,BARSLAST(L=LLV(L,7)))>REF(D,BARSLAST(L=LLV(L,7))),BARSLAST(L=LLV(L,7))<5,1) AND H<REF(H,REF(GT,1)+1),1,0),NODRAW;
FD11:=IF(DT=0 AND REF(DT,1)<GT AND IF(REF(G,BARSLAST(H=HHV(H,7)))<REF(D,BARSLAST(H=HHV(H,7))),BARSLAST(H=HHV(H,7))<5,1) AND L>REF(L,REF(DT,1)+1),1,0),NODRAW;
//再次周期
GT1:=BARSLAST(FG11<>1 AND FG1<>1 AND FG0),NODRAW;
DT1:=BARSLAST(FD11<>1 AND FD1<>1 AND FD0),NODRAW;
GGT1:=REF(GT1,1),NODRAW;//处理两边都少于3根的笔
HHHH:=REF(H,GT1),NODRAW;
HHHHH:=HHV(H,GT1+5),NODRAW;
FD2:=BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
//加两句，低是最低，去两边;
NL:=GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 ,NODRAW;
LLLLLLLL:=LLV(L,GT1+5),NODRAW;
FG2A:=BACKSET(REFX(GT1,1)=0 AND DT1<3 AND GT1-DT1<4 AND REF(L,DT1)<=LLV(L,GT1+5) AND REF(H,GT1)>HHV(H,GT1+5),GT1+1),NODRAW;
FG2B:=IF(GT1=0 AND DT1<4 AND REF(GT1,1)-DT1<4 AND REF(L,DT1)<=LLV(L,REF(GT1,1)+6) AND H>HHV(H,REF(GT1,1)+6),1,0),NODRAW;
FG2:=BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
FD2A:=BACKSET(REFX(DT1,1)=0 AND GT1<3 AND DT1-GT1<4 AND REF(H,GT1)>=HHV(L,DT1+5) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FD2B:=IF(DT1=0 AND GT1<4 AND REF(DT1,1)-GT1<4 AND REF(H,GT1)>=HHV(H,REF(DT1,1)+6) AND L>LLV(L,REF(DT1,1)+6),1,0),NODRAW;//
GGG:=IF(HHV(H,GT1+1)<HHV(H,GT1+15),HHV(H,GT1+1),NULL),NODRAW;
DDD:=IF(HHV(H,GT1+1)<HHV(H,GT1+15),HHV(H,GT1+15),NULL),NODRAW;
//处理单边都少于3根的笔
GT11:=BARSLAST(GT1=0 AND FG2<>1),NODRAW;
DT11:=BARSLAST(DT1=0 AND FD2<>1 AND FD02<>1),NODRAW;
//FG21:IF(GT1=0 AND DT1<4 AND H<HHV(H,REF(GT1,1)+3),1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND L>LLV(L,REF(DT1,1)+3) ,1,0),NODRAW;
FD22:=BACKSET(REFX(GT1,1)=0 AND DT1<3 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>LLV(L,GT1+5),DT1+1),NODRAW;
G22:=BACKSET(REFX(DT1,1)=0 AND GT1<3 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<HHV(H,DT1+5),GT1+1),NODRAW;
TTTTTT:=H<REF(H,REF(GT1,1)+1) AND DT1<4,NODRAW;
HHHHHH:=REF(LLV(L,10),DT1),NODRAW;//前长后短;
//FG21:IF(GT1=0 AND DT1<4 AND H<=REF(H,REF(GT1,1)+1) ,1,0),NODRAW;
//FD21:IF(DT1=0 AND GT1<4 AND L>=REF(L,REF(DT1,1)+1) ,1,0),NODRAW;
//前短后长,前低后高（去低）;
FD231:=BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND REF(L,DT1)>REF(LLV(L,10),DT1),DT1+1),NODRAW;
FG23:=BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)>REF(H,GT1) AND (REF(H,GT1)<REF(HHV(H,13),GT1) OR REF(FD231,DT1)=0),GT1+1),NODRAW;
//前短后长,前高后低（去高）;
NNN:=REF(H,GT1)>=REF(HHV(H,8),GT1),NODRAW;
//前短后长，去2;
FG231:=BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND REF(H,GT1)<REF(HHV(H,10),GT1) ,GT1+1),NODRAW;
FD23:=BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)<REF(L,DT1) AND ( REF(L,DT1)>REF(LLV(L,13),DT1) OR REF(FG231,GT1)=0),DT1+1),NODRAW;///前短后长，去3;
FDD23:=REF(H,GT1)<REF(HHV(H,10),GT1) OR REF(FD23,DT1)=0,NODRAW;
FD24:=BACKSET(REFX(GT1,1)=0 AND DT1>3 AND GT1>DT1 AND GT1-DT1<4 AND REFX(H,1)<HHV(H,GT1+3) AND REF(L,DT1)>LLV(L,DT1+5),DT1+1),NODRAW;
FG24:=BACKSET(REFX(DT1,1)=0 AND GT1>3 AND DT1>GT1 AND DT1-GT1<4 AND REFX(L,1)>LLV(L,DT1+3) AND REF(H,GT1)<HHV(H,GT1+5),GT1+1),NODRAW;
FG241:=IF(GT1=0 AND DT1>4 AND REF(GT1,1)-DT1<3 AND H<HHV(H,REF(GT1,1)+3) AND REF(FD24,DT1+2)<>1,1,0),NODRAW;
FD241:=IF(DT1=0 AND GT1>4 AND REF(DT1,1)-GT1<3 AND L>LLV(L,REF(DT1,1)+3) AND REF(FG24,GT1+2)<>1,1,0),NODRAW;
FGE:=BACKSET(ISLASTBAR AND DT1-GT1<3 AND DT1>GT1, GT1+1),NODRAW;//FDE:BACKSET(ISLASTBAR AND GT1-DT1<3 AND GT1>DT1, DT1+1),NODRAW;
FG21:=IF(GT1=0 AND DT1<4 AND REF(GT1,1)<4,1,0),NODRAW;
FD21:=IF(DT1=0 AND GT1<4 AND REF(DT1,1)<4 ,1,0),NODRAW;
//做两次高低点间多余的点
GT2:=BARSLAST(FG21<>1 AND FG23<>1 AND FG231<>1 AND FG24<>1 AND FG2<>1 AND FG2A<>1 AND FG2B<>1 AND GT1=0),NODRAW;
DT2:=BARSLAST(FD21<>1 AND FD23<>1 AND FD231<>1 AND FD24<>1 AND FD2<>1 AND FD2A<>1 AND FD2B<>1 AND DT1=0),NODRAW;
FG3:=BACKSET(REFX(GT2,1)=0 AND GT2<DT2 AND REFX(H,1)>=REF(H,GT2),GT2+1),NODRAW;
//HHX:REF(H,GT2),NODRAW;
FD3:=BACKSET(REFX(DT2,1)=0 AND DT2<GT2 AND REFX(L,1)<=REF(L,DT2),DT2+1),NODRAW;
FG31:=IF(GT2=0 AND REF(GT2,1)<DT2 AND H<REF(H,REF(GT2,1)+1),1,0),NODRAW;
FD31:=IF(DT2=0 AND REF(DT2,1)<GT2 AND L>REF(L,REF(DT2,1)+1),1,0),NODRAW;
GT3:=BARSLAST(GT2=0 AND FG3<>1 AND FG31<>1 ),NODRAW;
DT3:=BARSLAST(DT2=0 AND FD3<>1 AND FD31<>1),NODRAW;
FG4:=BACKSET(REFX(GT3,1)=0 AND GT3<DT3 AND REFX(H,1)>=REF(H,GT3),GT3+1),NODRAW;
FD4:=BACKSET(REFX(DT3,1)=0 AND DT3<GT3 AND REFX(L,1)<=REF(L,DT3),DT3+1),NODRAW;
FG41:=IF(GT3=0 AND REF(GT3,1)<DT3 AND H<REF(H,REF(GT3,1)+1),1,0),NODRAW;
FD41:=IF(DT3=0 AND REF(DT3,1)<GT3 AND L>REF(L,REF(DT3,1)+1),1,0),NODRAW;
LLL:=DT3=0 AND FD31<>1 AND FD3<>1,NODRAW;
HHH:=FG0 AND FG11<>1 AND FG1<>1 AND FG2<>1 AND FG21<>1 AND FG31<>1 AND FG3<>1;
//PARTLINE(FD01,L,COLORRED),CIRCLEDOT,LINETHICK1;
//PARTLINE(FG0,H,COLORYELLOW),POINTDOT,LINETHICK1;
//PARTLINE(FD0,L,COLORCYAN),CIRCLEDOT,LINETHICK1;
BD:=IF(FD0 AND FD41<>1 AND FD4<>1 AND FD31<>1 AND FD3<>1 AND FD2<>1 AND FD11<>1 AND FD1<>1,L,0);
笔低:=IF(BD<>0,BD,NULL),COLORYELLOW,NODRAW;
BG:=IF(FG0 AND FG41<>1 AND FG4<>1 AND FG31<>1 AND FG3<>1 AND FG2<>1 AND FG11<>1 AND FG1<>1,H,0);
笔高:IF(BG<>0,BG,NULL),COLORYELLOW,NODRAW;
老笔:=1;
GB:=MA(C,5);
DB:=MA(C,10);
HHB:=REF(H,5)=HHV(H,11);
LL1:=REF(L,5)=LLV(L,11);
FGB01:=BACKSET(HHB,6)>BACKSET(HHB,5) ;
FDB01:=BACKSET(LL1,6)>BACKSET(LL1,5) ;
FGB02:=IF(BARSLAST(FGB01)=BARSLAST(FDB01) AND GB>DB,FGB01,IF(BARSLAST(FDB01)>BARSLAST(FGB01),FGB01,0));
FDB02:=IF(BARSLAST(FGB01)=BARSLAST(FDB01) AND DB>GB,FDB01,IF(BARSLAST(FGB01)>BARSLAST(FDB01),FDB01,0));
FGB0:=FGB02 AND H=HHV(H,BARSLAST(FDB02));
FDB0:=FDB02 AND L=LLV(L,BARSLAST(FGB02));
JG:=IF(FGB0 AND BG=0,H,1) ;
局高:=IF(JG<>1,JG,NULL),COLORGREEN,NODRAW;
JD:=IF(FDB0 AND BD=0,L,-1),COLORGREEN;
局低:IF(JD<>-1,JD,NULL),COLORGREEN,NODRAW;
短极点:IF(PERIOD>2,IF(极点保留=-1 AND BD=0 AND JD=-1,L,IF(极点保留=1 AND BG=0 AND JG=1,H,NULL)) ,NULL),COLORMAGENTA,NODRAW;
//中枢分割线
HIGH1:=REF(HHV(H,90),3);//3周期前的90周期的最高价
LOW1:=REF(LLV(L,90),3);//3周期前的90周期的最低价
J1:=HIGH1-(HIGH1-LOW1)*0.191;
J0:=HIGH1-(HIGH1-J1)/2;
J2:=HIGH1-(HIGH1-LOW1)*0.382;
J3:=HIGH1-(HIGH1-LOW1)*0.5;
J4:=HIGH1-(HIGH1-LOW1)*0.618;
J5:=HIGH1-(HIGH1-LOW1)*0.809;
J6:=HIGH1-(HIGH1-LOW1)*1.191;
JZ:=J0-(J0-LOW1)/2;
HIGHB1:=REF(HHV(H,60),3);
LOW2:=REF(LLV(L,60),3);
HIGHB2:=IF(HIGHB1<=J4,J4,IF(HIGHB1<=J3,J3-(J3-J4)/2,IF(HIGHB1<=J2,J2-(J2-J3)/2,IF(HIGHB1<=J1,J1-(J1-J2)/2,IF(HIGHB1<=HIGH1 ,HIGH1-(HIGH1-J1)/2,NULL)))));
HIGH2:=IF(HIGHB1<HIGHB2,HIGHB2,IF(HIGHB1>=HIGHB2 AND C<HIGHB2,HIGHB2,HIGHB1-(HIGHB1-HIGHB2)/2));
J22:=HIGH2+(HIGH2-LOW2)*0.191;
J12:=HIGH2-(HIGH2-LOW2)*0.191;
J42:=HIGH2-(HIGH2-LOW2)*0.618;
JZ2:=HIGH2-(HIGH2-J42)/2;
J52:=HIGH2-(HIGH2-LOW2)*0.809;
J02:=J52;
CL:=1;
AD:=REFX1(DATE<=200601,9999);//指标到期日
YYD:=HHV(H,60),COLORWHITE;
空损:=IF( HJ=2,MA(YYD,5),NULL),COLORGREEN,DOT;
YY3:=HHV(H,60)-(HHV(H,60)-LLV(L,30))*0.191,COLORGRAY;
做空:=IF( HJ=2,MA(YY3,5),NULL),COLORYELLOW;
YYC3:=HHV(H,30)-(HHV(H,30)-LLV(L,30))*0.382,COLORLIGHTGREY;
强:=IF( HJ=2,MA(YYC3,5),NULL),COLORLIGHTGREY;
YYC3CD:=HHV(H,30)-(HHV(H,30)-LLV(L,30))*0.618,COLORGREEN;
弱:=MA(YYC3CD,5),COLORGREEN;
YYC3D:=HHV(H,30)-(HHV(H,30)-LLV(L,30))*0.809,COLORRED;
做多:=IF( HJ=2,MA(YYC3D,5),NULL),COLORRED;
ZZ:=LLV(L,30);
多损:=IF( HJ=2,MA(ZZ,5),NULL),COLORGREEN,DOT;
NC:=8;
KKC:=0;
TYP := IF(PERIOD>7&&AD,(HIGH + LOW + CLOSE)/3,NULL);
CCI1:=(TYP-MA(TYP,6))/(0.015*AVEDEV(TYP,6));
CCI2:=(TYP-MA(TYP,10))/(0.015*AVEDEV(TYP,10));
CCI3:=(TYP-MA(TYP,20))/(0.015*AVEDEV(TYP,20));
CCI4:=(TYP-MA(TYP,30))/(0.015*AVEDEV(TYP,30));
CCI5:=(TYP-MA(TYP,60))/(0.015*AVEDEV(TYP,60));
CCI:=CCI1+CCI2+CCI3+CCI4+CCI5;
AAAB:=IF(PERIOD>2&&AD,(3*C+H+L+O)/6,NULL);
VVAR1:=(8*AAAB+7*REF(AAAB,1)+6*REF(AAAB,2)+5*REF(AAAB,3)+4*REF(AAAB,4)+3*REF(AAAB,5)+2*REF(AAAB,6)+REF(AAAB,8))/36;
VVAR6:=(LLV(VVAR1,2)+LLV(VVAR1,4)+LLV(VVAR1,6))/3;
短线:=IF(X=1 , QZS,NULL),COLORCYAN,LINETHICK1;
强线:=IF( X=1 , VVAR1, NULL),COLORWHITE,LINETHICK1;
中线:=IF( X=1 ,VVAR6, NULL),COLORLIGHTRED,LINETHICK1;
FILLRGN1(短线>强线,短线,强线),RGB(150,10,50);
FILLRGN1( 短线<强线,短线,强线),RGB(10,100,10);
//未来函数预测波段顶底,通用程序
DRAWTEXT(PERIOD>=8 AND ISLASTBAR<>1 AND TROUGHBARS(L,20,1,1)=0 AND CL<3,L-0*M*MINPRICE,'大 底'),COLORRED,FONTSIZE15;
DRAWTEXT(PERIOD>=8 AND ISLASTBAR<>1 AND PEAKBARS(H,20,1,1)=0 AND CL<3,H+0*M*MINPRICE,'大 顶'),COLORGREEN,FONTSIZE15;
DDMS:=IF(PERIOD>=8 AND ISLASTBAR<>1 AND TROUGHBARS(L,20,1,1)=0,1,0);
DMS:=IF(PERIOD>=8 AND ISLASTBAR<>1 AND PEAKBARS(H,20,1,1)=0,1,0);
DRAWTEXT(ISLASTBAR<>1 AND TROUGHBARS(L,8,1,1)=0 AND DDMS<>1 AND CL<2,L-0*M*MINPRICE,'见 底'),COLORWHITE,FONTSIZE16,VALIGN0;
DRAWTEXT(ISLASTBAR<>1 AND PEAKBARS(H,8,1,1)=0 AND DMS<>1 AND CL<2,H+0*M*MINPRICE,'见 顶'),COLORYELLOW,FONTSIZE16;
DTS:=IF(ISLASTBAR<>1 AND PEAKBARS(H,8,1,1)=0,1,0);
JDTS:=IF(ISLASTBAR<>1 AND TROUGHBARS(L,8,1,1)=0,1,0),COLORWHITE;
DRAWTEXT((PERIOD<=13 AND ZIGZAG(C,3,1)<REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)>=REF(ZIGZAG(C,3,1),2)) AND REF(ZIGZAG(C,3,1),2)>=REF(ZIGZAG(C,3,1),3) AND DTS<>1 AND CL<3,HIGH+0*M*MINPRICE,'卖'),COLORYELLOW,FONTSIZE14,VALIGN1;
DRAWTEXT((PERIOD<=13 AND ZIGZAG(C,3,1)>REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)<=REF(ZIGZAG(C,3,1),2)) AND (REF(ZIGZAG(C,3,1),2)<=REF(ZIGZAG(C,3,1),3)) AND JDTS<>1 AND CL<3,LOW-0*M*MINPRICE,'买'),COLORWHITE,FONTSIZE14,VALIGN1;
XZDZ:=IF((PERIOD<=13 AND ZIGZAG(C,3,1)>REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)<=REF(ZIGZAG(C,3,1),2)) AND (REF(ZIGZAG(C,3,1),2)<=REF(ZIGZAG(C,3,1),3)) AND JDTS<>1,1,0);
XZDD:=IF((PERIOD<=13 AND ZIGZAG(C,3,1)<REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)>=REF(ZIGZAG(C,3,1),2)) AND REF(ZIGZAG(C,3,1),2)>=REF(ZIGZAG(C,3,1),3) AND DTS<>1,1,0);
BB:=(PERIOD<=13 AND ZIGZAG(C,3,1)>REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)<=REF(ZIGZAG(C,3,1),2)) AND (REF(ZIGZAG(C,3,1),2)<=REF(ZIGZAG(C,3,1),3)) AND JDTS<>1 AND CL<3;
SS:=(PERIOD<=13 AND ZIGZAG(C,3,1)<REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)>=REF(ZIGZAG(C,3,1),2)) AND REF(ZIGZAG(C,3,1),2)>=REF(ZIGZAG(C,3,1),3) AND DTS<>1 AND CL<3;
DRAWCOLORKLINE(BARSLAST(BB)<BARSLAST(SS),COLORRED,1);
DRAWCOLORKLINE(BARSLAST(BB)<BARSLAST(SS)&&ISDOWN,COLORLIGHTRED,0);
DRAWCOLORKLINE(BARSLAST(BB)>BARSLAST(SS),COLORGREEN,1);
DRAWCOLORKLINE(BARSLAST(BB)>BARSLAST(SS)&&ISDOWN,COLORLIGHTGREEN,0);
TY:=(CLOSE+HIGH+LOW)/3;
CCIB:=(TY-MA(TY,14))/(0.015*AVEDEV(TY,14));
YY:=IF(BG<>0 AND CCIB<100 AND CCIB>0,1,0);
P:=2;
MID:=MA(C,20);
UPPER:= MID+P*STD(C,20);
LOWER:= MID - P*STD(C,20);
AT:=MA(C,20),COLORBLUE;
通道限宽:=(C-LOWER)/(UPPER-LOWER),COLORRED;
通道极限:=100*(C-AT)/STD(C,26),COLORWHITE;
通道趋势:=EMA(通道极限,3),COLORMAGENTA;
GLQD2:=IF(BD<>0 AND FDB0=1 AND 极点保留=-1 AND CCIB<-100 AND 通道极限>-100,1,0);
XJ:=IF(BD<>0 AND FDB0=1 AND 极点保留=-1 AND CCIB<-100 AND 通道极限<-170,LLV(L,60),0);
XJGL:=IF(BD<>0 AND FDB0=1 AND 极点保留=-1 AND CCIB<-100 AND 通道极限<-170 AND L>=XJ AND JDTS<>1 AND XZDZ<>1,1,0);
XX1:=IF(BD<>0 AND CCIB>0 OR 通道极限>0,1,NULL);
ZDG1:=REF(HHV(H,5),8) ,NODRAW;
ZDG2:=REF(HHV(H,5),16) ,NODRAW;
ZDG3:=REF(HHV(H,5),24) ,NODRAW;
ZDG4:=REF(HHV(H,5),32) ,NODRAW;
ZDG5:=REF(HHV(H,5),40) ,NODRAW;
ZDG6:=REF(HHV(H,5),48) ,NODRAW;
ZDG7:=REF(HHV(H,5),56) ,NODRAW;
DPD:=IF(BG<>0 AND FGB0=1 AND H<=ZDG1 ,1,0);
PD1:=IF(BG<>0 AND FGB0=1 AND H<=ZDG2,DPD+1,DPD);
PD2:=IF(BG<>0 AND FGB0=1 AND H<=ZDG3,PD1+1,PD1);
PD3:=IF(BG<>0 AND FGB0=1 AND H<=ZDG4,PD2+1,PD2);
PD4:=IF(BG<>0 AND FGB0=1 AND H<=ZDG5,PD3+1,PD3);
PD5:=IF(BG<>0 AND FGB0=1 AND H<=ZDG6,PD4+1,PD4);
PD6:=IF(BG<>0 AND FGB0=1 AND H<=ZDG7,PD5+1,PD5);
背离次数:=PD6,NODRAW;
GLQD:=IF(BG<>0 AND FGB0=1 AND 极点保留=1 AND CCIB>100 AND 通道极限<170,1,0);
GLQD1:=IF(BG<>0 AND FGB0=1 AND 极点保留=1 AND CCIB>100 AND 通道极限>170 AND DTS<>1,1,0);
JS:=IF(ISLASTBAR=1,1,0);
DRAWCOLORKLINE((PERIOD<=13 AND ZIGZAG(C,3,1)>REF(ZIGZAG(C,3,1),1)) AND (REF(ZIGZAG(C,3,1),1)<=REF(ZIGZAG(C,3,1),2)) AND (REF(ZIGZAG(C,3,1),2)<=REF(ZIGZAG(C,3,1),3)) AND JDTS<>1 AND CL<3,COLORRED,0);
DRAWSHIFTNUMBER(HHH,H,MOD(H,100),0,COLORLIGHTRED,0,0),VALIGN2,FONTSIZE15;//价格后0移动
DRAWSHIFTNUMBER(LLL,L,MOD(L,100),0,COLORLIGHTGREEN,0,0),VALIGN0,FONTSIZE15;